Skip to content
Boilers.caby ROMA Heating & Cooling

Viessmann · Vitocrossal 200 (CM2, GW6B)

Viessmann Vitocrossal 200 CM2-500

The Vitocrossal 200 CM2-500 is the mid-size model of the large CM2 (GW6B) chassis: 358 to 1800 MBH natural-gas input (105 to 527 kW) at 95.1% combustion efficiency and 5:1 turndown, weighing 1662 lb (754 kg).

CurrentSold in Canada

Key figures

Max input
1,800 MBH
Max CSA output
—
AFUE
—
Min input
358 MBH
Natural gasPropaneHeating-onlycommercial

Input is gas energy consumed; output is heat delivered. Never size from input alone.

Viessmann Vitocrossal 200 CM2-500 in practice

The CM2-500 steps the Vitocrossal 200 CM2 range toward the 1800 MBH class: natural-gas input from 358,000 to 1,800,000 BTU (105 to 527 kW) per the product page, with a higher 358,000 BTU (105 kW) minimum fire than the CM2-400's 287,000 BTU.

It weighs 1662 lb (754 kg) — 167 lb more than the CM2-400 — and keeps the large chassis' 95.1% combustion-efficiency row and 5:1 turndown. Service coverage is the 400–620 service instructions (doc 5546 489 - 15, 05/2021).

The CM2 platform features apply throughout: Inox-Crossal stainless steel heat exchanger, pre-mix cylinder burner, natural gas or propane with simple electronic conversion, Vitotronic 300 GW6B control, cascade control of up to eight boilers, common venting of up to four boilers and no dedicated boiler pump.

Best suited to

  • Large plants whose design load approaches 1800 MBH of input
  • Loads that outgrow the CM2-400 without needing the CM2-620's ceiling
  • Commercial cascades built from the large CM2 chassis

Applicability and support

Model number
CM2-500
Canadian availability
available
Production status
current
ROMA supplies
Confirmed at consultation
ROMA services
Confirmed at consultation
Warranty
Not verified

Where ROMA provides on-site service

On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.

See all service areas

Specifications

Published specifications

Values as published by Viessmann. Units are shown with every value; notes flag conflicting sources or missing figures.

Viessmann Vitocrossal 200 CM2-500 specifications
SpecificationValueNote
Input
Input, minimum (natural gas)358 MBH358,000 BTU (105 kW), per the product page
Input, maximum (natural gas)1,800 MBH1,800,000 BTU (527 kW), per the product page
Efficiency
Combustion efficiency95.1 %Per the product-page efficiency row.
Physical and connections
Weight1,662 lb754 kg
Operating limits and other
Turndown ratio5:1Per the product page.

Frequently asked questions

What is the firing range of the CM2-500?

Natural-gas input runs 358,000 to 1,800,000 BTU (105 to 527 kW) per the product page.

How does the CM2-500 differ from the CM2-400?

Maximum input rises from 1,445,000 to 1,800,000 BTU and the minimum fire from 287,000 to 358,000 BTU; weight rises from 1495 to 1662 lb. Both print 95.1% combustion efficiency with 5:1 turndown.

Is the CM2-500 covered by the small CM2 manual?

No. It is documented by the large service instructions (doc 5546 489 - 15, 05/2021), which cover the CM2-400, CM2-500 and CM2-620.

Questions about the Viessmann Vitocrossal 200 CM2-500?

Describe what the boiler is doing and get a straight answer about the next step.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate