Canada-wide gas boiler information · On-site service in Greater Vancouver, BC
Boilers.ca is a brand of ROMA Heating & Cooling · Licensed gas contractor LGA0202903
Bryan Boilers · Series
The Bryan BFIT is the company's commercial condensing stainless-steel boiler line — 'unprecedented output in minimal space' with inputs from 400 to 4,000 MBH, all models 97% thermal efficient, and 400–2,000 MBH models sized to fit through standard doorways.
Series facts
'all models are 97% Thermal Efficient' as printed on the BFIT page; the 400–1500 submittals print 97% thermal/combustion efficiency and the 1500 submittal prints 96%.
Bryan's BFIT page describes the line as 'big outfit designed to fit' — 'unprecedented output in minimal space, serviceability, and accommodates both variable flow or primary/secondary piping'. The page prints inputs of 400, 500, 650, 800, 1000, 1250, 1500, 2000, 2500, 3000, 3500 and 4000 MBH, all 97% thermal efficient, and states the design averages '46% less space than competitors' with models 400–2000 fitting through standard doorways.
The published submittal data sheets print per-model ratings: input low/high fire, output high fire, boiler horsepower, recovery rate, thermal/combustion efficiency, heating surface, water volume, fuel, firing mode, turndown, NOx, gas pressures, shipping weight, dimensions, water/vent/air/gas connections and electrical draw. Boilers.ca documents six sizes from those official submittals.
The BFIT uses a stainless steel heat exchanger, ASME Section IV 'H' stamp at 160 PSIG / 210°F, the Concert control with EMS communications, and a 10-year limited pressure vessel warranty; Bryan publishes the I&O, parts and control manuals as public downloads. The BFITW Series applies the same platform to commercial condensing water heaters (400–4,000 MBH), documented separately as a DHW-only line.
Highlights
Bryan publishes a '25 Year Thermal Shock Warranty' document (Form 1630) linked across its boiler product pages.
Models
One canonical page per model with input, output and efficiency kept separate.
Bryan Boilers
The Bryan BFIT 400 is a commercial condensing stainless-steel boiler rated 399,000 BTU/hr input and 387,000 BTU/hr output at 97% thermal/combustion efficiency, 12 BHP, with 10:1 turndown and <10 ppm NOx in Bryan's published submittal.
Bryan Boilers
The Bryan BFIT 650 is a commercial condensing stainless-steel boiler rated 650,000 BTU/hr input and 631,000 BTU/hr output at 97% thermal/combustion efficiency, 19 BHP, with 10:1 turndown and <10 ppm NOx in Bryan's published submittal.
Bryan Boilers
The Bryan BFIT 1000 is a commercial condensing stainless-steel boiler rated 999,000 BTU/hr input and 969,000 BTU/hr output at 97% thermal/combustion efficiency, 29 BHP, with 10:1 turndown and <10 ppm NOx in Bryan's published submittal.
Bryan Boilers
The Bryan BFIT 1500 is a commercial condensing stainless-steel boiler rated 1,500,000 BTU/hr input and 1,440,000 BTU/hr output at 96% thermal/combustion efficiency, 43 BHP, with 10:1 turndown and <20 ppm NOx in Bryan's published submittal.
Bryan Boilers
The Bryan BFIT 2000 is a commercial condensing stainless-steel boiler rated 1,999,000 BTU/hr input and 1,939,000 BTU/hr output at 97% thermal/combustion efficiency, 58 BHP, with 5:1 turndown and <10 ppm NOx in Bryan's published submittal.
Bryan Boilers
The Bryan BFIT 3000 is a commercial condensing stainless-steel boiler rated 3,000,000 BTU/hr input and 2,910,000 BTU/hr output at 97% thermal/combustion efficiency, 87 BHP, with 5:1 turndown and <10 ppm NOx in Bryan's published submittal.
| Specification | Bryan BFIT 400 | Bryan BFIT 650 | Bryan BFIT 1000 | Bryan BFIT 1500 | Bryan BFIT 2000 | Bryan BFIT 3000 |
|---|---|---|---|---|---|---|
| Input, low fire | 40,000 BTU/HR | 65,000 BTU/HR | 100,000 BTU/HR | 150,000 BTU/HR | 399,000 BTU/HR | 600,000 BTU/HR |
| Input, high fire | 399,000 BTU/HR | 650,000 BTU/HR | 999,000 BTU/HR | 1,500,000 BTU/HR | 1,999,000 BTU/HR | 3,000,000 BTU/HR |
| Output, high fire | 387,000 BTU/HR | 631,000 BTU/HR | 969,000 BTU/HR | 1,440,000 BTU/HR | 1,939,000 BTU/HR | 2,910,000 BTU/HR |
| afue | — | — | — | — | — | — |
| Burner turndown | 10:1 | 10:1 | 10:1 | 10:1 | 5:1 | 5:1 |
| vent-max-3 | — | — | — | — | — | — |
| vent-max-2 | — | — | — | — | — | — |
| weight | — | — | — | — | — | — |
Read the full comparison: Bryan BFIT 400 vs BFIT 650 →
Read the full comparison: Bryan BFIT 650 vs BFIT 1000 →
Error codes and alerts
No alerts documented for this series yet.
Manuals
Where ROMA provides on-site service
On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.
Services for Bryan Boilers boilers
Bryan prints inputs of 400, 500, 650, 800, 1000, 1250, 1500, 2000, 2500, 3000, 3500 and 4000 MBH, all 97% thermal efficient.
Yes. Bryan lists the BFIT under condensing products with a stainless steel heat exchanger, Category II or IV venting and 97% thermal efficiency.
Bryan states models 400–2000 fit through standard doorways; the larger 2500–4000 sizes use boiler racks and stacking options documented on the BFIT page.
Describe what the boiler is doing and get a straight answer about the next step.
On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.
Sources and verification
Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.