IBC Technologies · Error codes
IBC SFC-1 E — Control module internal error
E
The display shows a flashing E for a control module internal error that disables operation entirely. The manual's approach is to remove field wiring and reset to test for voltage backfeed before replacing the module.
Applies to
This error is shown by the numeric-display touch panel control on Superflow SFC-1 combi boilers (SFC 99-1, SFC 125-1 and SFC 199-1), as documented in IBC Installation & Operating Instructions — SFC-1 combi boilers, doc 84156406, sections 5.3.1–5.3.3.
- IBC Technologies Superflow SFC-1 Combi
- IBC SFC 99-1 Superflow
- IBC SFC 125-1 Superflow
- IBC SFC 199-1 Superflow
Controller: numeric-display touch panel control. Source manual: 84156406 (2024-09).
Why a code is not a diagnosis
The error can be genuine module failure or backfeed from external wiring. It does not indicate a gas or water fault by itself.
Safe things to observe
- Note the display and whether the error appeared after electrical work elsewhere on the property.
- If the appliance stays off, call a technician rather than repeatedly cycling power.
Do not
- Do not open the control module.
How professional service helps
- A technician follows the manual's sequence: remove field wiring, reset, check for voltage backfeed, then replace the control module if the error returns.
Where ROMA provides on-site service
On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.
Parts and service
Parts commonly involved
These parts appear in the documented text for this alert. A code reports a condition, not a failed part — a technician confirms the cause by testing before anything is replaced.
Control board / PCB
The control board — also called the PCB, or printed circuit board — is the boiler's main computer.
What a technician checks →
Service for this alert
- Gas Boiler Repair
Licensed gas technicians from ROMA Heating & Cooling diagnose and repair residential and light-commercial gas boilers across…
- Emergency Boiler Repair
Priority gas boiler repair for homes and buildings in Greater Vancouver with no heat, no hot water, a locked-out boiler or a leak.
Every boiler part explained — what it does, how it fails and what a technician checks.
Documented for IBC Technologies Superflow SFC-1 Combi.
Boiler locked out? Call with the alert text ready.
The brand, model and this alert are passed along when you request service online, so the technician arrives prepared.
On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.
Sources and verification
- IBC Installation & Operating Instructions — SFC-1 combi boilers, doc 84156406, sections 5.3.1–5.3.3 · 84156406 · accessed September 7, 2026
Facts checked September 7, 2026. Last updated September 7, 2026. Technical reviewer: not yet assigned.