IBC Technologies · Error codes
IBC SFC-1 F010 — Heat exchanger temperature sensor open
F010
The heat exchanger temperature sensor reads as an open circuit. The controller cannot measure heat exchanger temperature and flags the circuit.
Applies to
This fault is shown by the numeric-display touch panel control on Superflow SFC-1 combi boilers (SFC 99-1, SFC 125-1 and SFC 199-1), as documented in IBC Installation & Operating Instructions — SFC-1 combi boilers, doc 84156406, sections 5.3.1–5.3.3.
- IBC Technologies Superflow SFC-1 Combi
- IBC SFC 99-1 Superflow
- IBC SFC 125-1 Superflow
- IBC SFC 199-1 Superflow
Controller: numeric-display touch panel control. Source manual: 84156406 (2024-09).
Why a code is not a diagnosis
An open circuit can be the sensor itself or the wiring between the sensor and the control module. The manual's checks isolate which by measuring resistance at both ends.
Safe things to observe
- Note the code; there is no homeowner-accessible check for this fault.
Do not
- Do not open the appliance to test sensor wiring yourself.
How professional service helps
- A technician measures the sensor and its harness per the manual (centre pin common), repairing or replacing the open circuit.
Where ROMA provides on-site service
On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.
Parts and service
Parts commonly involved
These parts appear in the documented text for this alert. A code reports a condition, not a failed part — a technician confirms the cause by testing before anything is replaced.
Heat exchanger
The heat exchanger is where a boiler transfers heat from the burner flame to the water that heats your home.
What a technician checks →Boiler sensors (thermistors)
Boiler sensors are small temperature probes, usually thermistors, that tell the control how hot the water and flue gases are so it can fire safely…
What a technician checks →
Service for this alert
- Gas Boiler Repair
Licensed gas technicians from ROMA Heating & Cooling diagnose and repair residential and light-commercial gas boilers across…
- Gas Boiler Replacement
ROMA replaces old, failed or inefficient gas boilers in Greater Vancouver, handling removal, venting and gas-supply changes,…
Every boiler part explained — what it does, how it fails and what a technician checks.
Documented for IBC Technologies Superflow SFC-1 Combi.
Boiler locked out? Call with the alert text ready.
The brand, model and this alert are passed along when you request service online, so the technician arrives prepared.
On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.
Sources and verification
- IBC Installation & Operating Instructions — SFC-1 combi boilers, doc 84156406, sections 5.3.1–5.3.3 · 84156406 · accessed September 7, 2026
Facts checked September 7, 2026. Last updated September 7, 2026. Technical reviewer: not yet assigned.