IBC EX 850
The IBC EX 850 is the largest EX Series boiler: 85–850 MBH input, 824.5 MBH output at 97.0% thermal efficiency, a 6" flue, 2½" NPT-M water connections and 120 equivalent feet of vent per side.
Key figures
- Max input
- 850 MBH
- Max CSA output
- 824.5 MBH
- AFUE
- —
- Min input
- 85 MBH
Input is gas energy consumed; output is heat delivered. Never size from input alone.
IBC EX 850 in practice
The EX 850 tops the EX Series at 85–850 MBH CSA input (24.9–249 kW) with 824.5 MBH CSA output (241.6 kW) at 97.0% thermal efficiency to ANSI/AHRI-1500, matching the EX 700's efficiency. It shares the 700's connection group: a 6" Schedule 40 flue, 4" combustion air that must transition to 6" within three feet, and 2½" NPT-M water connections.
Venting is limited to 120 equivalent feet per side, with direct-vent or indoor air supply. At approximately 510 lb (231 kg) empty it is the heaviest EX model, with 99.88 ft² (9.28 m²) of heating surface and 16.4 USG (62.0 L) of vessel water; the minimum flow is 21 USgpm against the series' 100 USgpm maximum.
Like every EX model it carries the touchscreen control, remote access, multi-boiler communication and 10:1 turndown, and is rated 160 psig maximum operating pressure with a supplied 50 psig relief valve (30, 100, 125 and 150 psig alternatives are available). The EX I&O manual is 120-327E10.
Best suited to
- Large commercial buildings needing up to 824.5 MBH output
- Projects planning multi-boiler EX plants with 10:1 turndown
- Mechanical rooms able to run 6" flue within 120 equivalent feet per side
Applicability and support
- Model number
- EX 850
- Canadian availability
- available
- Production status
- current
- ROMA supplies
- Confirmed at consultation
- ROMA services
- Confirmed at consultation
- Warranty
- Not verified
Where ROMA provides on-site service
On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.
Specifications
Published specifications
Values as published by IBC Technologies. Units are shown with every value; notes flag conflicting sources or missing figures.
| Specification | Value | Note |
|---|---|---|
| Input | ||
| CSA input, minimum | 85 MBH | 24.9 kW |
| CSA input, maximum | 850 MBH | 249 kW |
| Output | ||
| CSA output | 824.5 MBH | 241.6 kW |
| Efficiency | ||
| Thermal efficiency (ANSI/AHRI-1500) | 97 % | |
| Venting and air | ||
| Max. equivalent vent length, each side | 120 ft | |
| Flue / combustion air | 6" Schedule 40 flue / 4" Schedule 40 combustion air | IBC requires the combustion air to transition to 6" within three feet of the 4" collar. |
| Air intake | Direct vent or indoor supply | |
| Physical and connections | ||
| Weight (empty) | 510 lb | Approx. 231 kg |
| Heating surface area | 99.88 ft² / 9.28 m² | |
| Pressure vessel water content | 16.4 USG / 62.0 L | |
| Water connections | 2½" NPT-M | |
| Gas connection | 1" NPT-F | |
| Condensate connection | 3/4" hose | |
| Electrical | ||
| Power use at full fire (less pumps) | 228 W | 120 V / 60 Hz. |
| Operating limits and other | ||
| Minimum boiler flow rate | 21 USgpm | |
| Fuel | Natural gas or propane | CSA input is rated for natural gas or propane on IBC's EX commercial specification table. |
| Gas supply pressure | 4 – 14 in. w.c. | |
| Ambient temperature | 32 – 122 °F | 0 – 50°C. |
| Minimum water temperature | 34 °F | 1°C. |
| Max. water temperature (electronic hi-limit) | 190 °F | 88°C; lockout limit 201°F / 94°C. |
| Max. ΔT supply/return | 80 °F | 44°C electronic fence. |
| Maximum boiler flow rate | 100 USgpm / 378 Lpm | |
| Max. operating water pressure | 160 psig | 1,103 kPa. |
| Minimum water pressure | 8 psig | 55 kPa. |
| Relief valve (supplied) | 50 psig | 345 kPa; alternative 30, 100, 125 and 150 psig relief valves are available. |
| Altitude rating | 0 – 12,000 ft | |
Manuals
Alerts documented for this model
- Ignition Trials Exceeded
- Water High Limit
- Low Water Cutoff
- Interlock 1 or 2 Open
- Vent High Limit
- Max. delta T Exceeded
- Fan Pressure
- High/Low Gas Press
- Module High Current
- Low Module Current
- Low Water Pressure
- Inlet Pres. Sensor
- See: Status > SIM menu > Status
- Roll Out Switch
- Controller Board
- No Boilernet Comm
- No MAC address
- [Vent High Pressure]
- Flame Signal / Vent Block
- Reversed Flow
- Temp. probe error
- Unhandled error code
- Blank – screen dark
- Service mode after update
- Water High Limit / Low Water Cutoff won't clear
- Outlet Limited
- Remote offline
- Unoccupied
- Summer
- Failsafe Setpoint
- Sensor
Frequently asked questions
How much output does the EX 850 deliver?
824.5 MBH CSA output (241.6 kW) from 85–850 MBH input (24.9–249 kW), per IBC's EX commercial specification table.
Is the EX 850 more efficient than the EX 700?
No. Both are rated 97.0% thermal efficiency to ANSI/AHRI-1500; the EX 400 (97.9%) and EX 500 (97.5%) are higher.
What is the EX 850's minimum flow?
21 USgpm, the highest minimum in the EX Series; the maximum is 100 USgpm for all four models.
Questions about the IBC EX 850?
Describe what the boiler is doing and get a straight answer about the next step.
On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.
Sources and verification
- IBC EX Series — series page (Canada) · accessed September 9, 2026
- IBC Technical Information Portal — EX commercial specification table · accessed September 9, 2026
Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.