Laars Heating Systems · Error codes
Laars FT Series Wall 78 — Cascade Error
78
Cascade error. A cascade error requires referring to the manufacturer's document 1349 for cascading the FT boiler.
Applies to
This communication or network fault code is displayed by the Laars FT wall control (NGTB-900CP) on FT Series Wall models (FTHW 100/140/199 heat-only and FTCW 140/199 combi), as documented in FT Series Wall Heat-Only Installation and Operation Instructions, Document 1483C (the FTCW combi manual 1487C prints the same code table) (1483C). Codes can differ between controller generations, so always check the manual that matches your unit.
- Laars Heating Systems FT Series Wall
- Laars FTHW100
- Laars FTHW140
- Laars FTHW199
- Laars FTCW140
- Laars FTCW199
Controller: Laars FT wall control (NGTB-900CP). Source manual: 1483C.
Why a code is not a diagnosis
A communication code involves the link between controls (cascade, remote, sensors on a bus). Another unit being off, a wiring fault or an address conflict can all produce it.
Safe things to observe
- Check that every appliance in a multi-unit plant has power.
- Report the code together with any other codes on the system.
Do not
- Do not re-address or rewire control networks yourself.
How professional service helps
- A technician verifies power, wiring and settings across the connected units.
- Combustion and safety devices are verified with an analyser and the manufacturer's procedure after any repair.
Where ROMA provides on-site service
On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.
Frequently asked questions
Can I clear this code myself?
Clearing a code without fixing its cause usually just brings it back. Note the code, check the safe items on this page, then call a licensed technician. If your appliance manual describes a user reset for this exact code and it stays away, no call may be needed.
Boiler locked out? Call with the alert text ready.
The brand, model and this alert are passed along when you request service online, so the technician arrives prepared.
On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.
Sources and verification
- FT Series Wall Heat-Only Installation and Operation Instructions, Document 1483C (the FTCW combi manual 1487C prints the same code table) · 1483C · accessed September 7, 2026
Facts checked September 7, 2026. Last updated September 7, 2026. Technical reviewer: not yet assigned.