Laars Heating Systems · FT Series Wall
Laars FTHW140
The Laars FTHW140 is the mid-size FT Series Wall heating-only boiler: a wall-hung condensing unit rated 140,000 BTU/h on the manual cover, natural gas from the factory with propane field-convertible, on the NGTB-900CP control.
Key figures
- Max input
- 140 MBH
- Max CSA output
- —
- AFUE
- —
- Min input
- —
Input is gas energy consumed; output is heat delivered. Never size from input alone.
Laars FTHW140 in practice
The FTHW140 sits between the 100 and 199 MBH heating-only steps of the FT wall line — the manual (Document 1483C) prints it at 140,000 BTU/h. It is a wall-hung condensing boiler on the NGTB-900CP control, documented with natural gas as the factory configuration and propane field-convertible.
Diagnostics follow the two-digit FT code family in Section 6.1, with each code typed as a Soft Lock or Hard Lock; the FTHW140 is heating-only, so there is no integrated domestic hot water production and no DHW component codes of its own beyond the shared table entries.
Best suited to
- Homes whose heat-loss calculation lands between the 100 and 199 MBH steps
- Heating-only systems where 140 MBH of ceiling covers the design-day load
- Projects wanting the FTHW heat-only layout without stepping up to the 199
Applicability and support
- Model number
- FTHW140
- Canadian availability
- available
- Production status
- current
- ROMA supplies
- Confirmed at consultation
- ROMA services
- Confirmed at consultation
- Warranty
- Not verified
Where ROMA provides on-site service
On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.
Specifications
Published specifications
Values as published by Laars Heating Systems. Units are shown with every value; notes flag conflicting sources or missing figures.
| Specification | Value | Note |
|---|---|---|
| Input | ||
| Maximum input (as printed) | 140 MBH | Printed on the installation manual cover as the FTHW 140,000 BTU/h model (Document 1483C). |
| Domestic hot water | ||
| Domestic hot water | None built in — heating-only model; hot water comes from a separate tank or water heater | |
| Operating limits and other | ||
| Fuel | Natural gas or propane | Natural gas is the factory configuration; propane is field-convertible per the manual cover. |
| Error reporting | Two-digit numeric codes with Soft Lock and Hard Lock classes per Section 6.1 of the installation manual | |
Frequently asked questions
How does the FTHW140 differ from the FTHW100?
Only the rating step differs within the same heating-only wall design: the FTHW140 is printed at 140,000 BTU/h against the FTHW100's 100,000 BTU/h. Both share the FT wall manual, code family and fuel configuration.
Is the FTHW140 a combi boiler?
No. It is the heating-only FTHW variant; the combi versions of the wall series are the FTCW140 and FTCW199 models documented in their own manual (Document 1487C).
Can the FTHW140 be converted to propane?
The manual cover states propane is field-convertible, meaning the boiler ships in the natural-gas factory configuration and conversion is a licensed gas-fitting task done with Laars' published procedure and parts.
Questions about the Laars FTHW140?
Describe what the boiler is doing and get a straight answer about the next step.
On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.
Sources and verification
- Laars Heating Systems — official site · accessed September 7, 2026
- Laars — contact (Laars Canada, 9 Brigden Gate, Halton Hills, Ontario) · accessed September 7, 2026
Facts checked September 7, 2026. Last updated September 7, 2026. Technical reviewer: not yet assigned.