IBC Technologies · Error codes
IBC SFC-1 F007 — Low flame signal
F007
The controller measures the flame signal as weaker than expected. A weak signal can make the appliance unreliable at proving the flame, even if it is currently burning.
Applies to
This fault is shown by the numeric-display touch panel control on Superflow SFC-1 combi boilers (SFC 99-1, SFC 125-1 and SFC 199-1), as documented in IBC Installation & Operating Instructions — SFC-1 combi boilers, doc 84156406, sections 5.3.1–5.3.3.
- IBC Technologies Superflow SFC-1 Combi
- IBC SFC 99-1 Superflow
- IBC SFC 125-1 Superflow
- IBC SFC 199-1 Superflow
Controller: numeric-display touch panel control. Source manual: 84156406 (2024-09).
Why a code is not a diagnosis
Low flame signal can come from a dirty or failing ignitor/sensor, a loose connection, or combustion that is out of adjustment. The code does not identify which.
Safe things to observe
- Note the code and whether it appears after a long period without servicing.
- If the appliance still runs, book a service visit rather than ignoring repeated low-signal codes.
Do not
- Do not clean or adjust the ignitor yourself.
How professional service helps
- A technician checks the ignitor connection and condition, cleaning or replacing it as needed.
- Combustion readings at low and high fire are verified and adjusted within specification.
Where ROMA provides on-site service
On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.
Parts and service
Parts commonly involved
These parts appear in the documented text for this alert. A code reports a condition, not a failed part — a technician confirms the cause by testing before anything is replaced.
Flame sensor (flame rod)
The flame sensor is the small rod that proves a gas boiler's burner is actually lit before the control will keep the gas valve open.
What a technician checks →
Service for this alert
- Gas Boiler Repair
Licensed gas technicians from ROMA Heating & Cooling diagnose and repair residential and light-commercial gas boilers across…
Every boiler part explained — what it does, how it fails and what a technician checks.
Documented for IBC Technologies Superflow SFC-1 Combi.
Boiler locked out? Call with the alert text ready.
The brand, model and this alert are passed along when you request service online, so the technician arrives prepared.
On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.
Sources and verification
- IBC Installation & Operating Instructions — SFC-1 combi boilers, doc 84156406, sections 5.3.1–5.3.3 · 84156406 · accessed September 7, 2026
Facts checked September 7, 2026. Last updated September 7, 2026. Technical reviewer: not yet assigned.