Skip to content
Boilers.caby ROMA Heating & Cooling

NTI Boilers · Error codes

NTI Trinity TRX CONFL — Cascade Boilers Share a Common Address

CONFL

Needs attentionNTI Trinity TRX Series II models 085–150C (Series II control, I&O 420012001500)

Cascade boilers share a common address. Two or more boilers in the cascade share a common address, which conflicts on the bus; causes include incorrect address settings with duplicate addresses, a short circuit on the BUS connection, or incorrect polarity-sensitive bus wiring.

Applies to

This communication or network fault code is displayed by the TRX Series II control on TRX Series II models up to 150C (TRX085, TRX110C, TRX120, TRX150C), as documented in TRX Series II 085–150C Installation and Operation Manual, doc 420012001500 Rev 04, Part 13-B Boiler Error Codes (420012001500 Rev 04). Codes can differ between controller generations, so always check the manual that matches your unit.

Controller: TRX Series II control. Source manual: 420012001500 Rev 04 (2024-03-18).

Why a code is not a diagnosis

A communication code involves the link between controls (cascade, remote, sensors on a bus). Another unit being off, a wiring fault or an address conflict can all produce it.

Safe things to observe

  • Check that every appliance in a multi-unit plant has power.
  • Report the code together with any other codes on the system.

Do not

  • Do not re-address or rewire control networks yourself.

How professional service helps

  1. A technician verifies power, wiring and settings across the connected units.
  2. Combustion and safety devices are verified with an analyser and the manufacturer's procedure after any repair.

Where ROMA provides on-site service

On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.

See all service areas

Frequently asked questions

Can I clear this code myself?

Clearing a code without fixing its cause usually just brings it back. Note the code, check the safe items on this page, then call a licensed technician. If your appliance manual describes a user reset for this exact code and it stays away, no call may be needed.

Boiler locked out? Call with the alert text ready.

The brand, model and this alert are passed along when you request service online, so the technician arrives prepared.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 7, 2026. Last updated September 7, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate