Skip to content
Boilers.caby ROMA Heating & Cooling

NTI Boilers · Trinity TRX

NTI Trinity TRX120

The NTI Trinity TRX120 is the 95% AFUE heating-only TRX between the 85 and the 150: it fires 13.2 to 120 MBH at just 88.6 lb, keeping the lightest chassis class in the series with 2" venting to 100 ft or 3" to 150 ft.

CurrentSold in Canada

Key figures

Max input
120 MBH
Max CSA output
—
AFUE
95 %
Min input
13.2 MBH
Natural gasPropaneHeating-onlyresidential

Input is gas energy consumed; output is heat delivered. Never size from input alone.

NTI Trinity TRX120 in practice

The TRX120 is the second rung of the TRX ladder, adding 35 MBH of input ceiling over the TRX085 while adding almost no weight — 88.6 lb against 88.2 lb. It is heating-only at 95% AFUE, pairs with an indirect tank for domestic hot water, and shares the XTRATECH heat exchanger, embedded Wi-Fi and 11:1 marketing turndown of the whole family.

The practical difference from the TRX085 is ceiling rather than low-fire behaviour: the 120 drops to 13.2 MBH minimum, high enough that very small homes should stay on the 85, but low enough for ordinary detached houses. If the heat-loss calculation plus indirect-tank recovery lands between 85 and 120 MBH, the 120 delivers it without moving to the heavier TRX150 chassis.

Best suited to

  • Detached homes whose heat-loss calculation exceeds the TRX085's ceiling
  • Households adding an indirect tank for domestic hot water recovery
  • Projects wanting a 120 MBH-class boiler that still weighs under 90 lb

Applicability and support

Model number
TRX120
Canadian availability
available
Production status
current
ROMA supplies
Confirmed at consultation
ROMA services
Confirmed at consultation
Warranty
Not verified

Where ROMA provides on-site service

On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.

See all service areas

Specifications

Published specifications

Values as published by NTI Boilers. Units are shown with every value; notes flag conflicting sources or missing figures.

NTI Trinity TRX120 specifications
SpecificationValueNote
Input
Input, minimum13.2 MBHPer the NTI product page.
Input, maximum120 MBHPer the NTI product page.
Efficiency
Efficiency (AFUE)95 %DOE AFUE per the NTI product page.
Domestic hot water
Domestic hot waterHeating-only; pair with an indirect tank or separate water heater
Venting and air
Max. equivalent vent length, 2"100 ftEach side per the I&O manual.
Max. equivalent vent length, 3"150 ftEach side per the I&O manual.
Physical and connections
Weight88.6 lbPer the NTI product page.
CH water connections1" male sweat with adapterPer the NTI product page.
Gas connection3/4" NPTMale NPT per the NTI product page.
Operating limits and other
FuelNatural gas or propaneNTI publishes LP conversion instructions for this series.
Turndown ratioup to 11:1Manufacturer marketing figure on the NTI product page.

Frequently asked questions

How does the TRX120 compare with the TRX085?

Both weigh about 88 lb and share the same chassis. The 120 fires 13.2 to 120 MBH at 95% AFUE; the 085 fires 9.4 to 85 MBH and is the only TRX rated 96%.

Is the TRX120 a combi?

No. It is heating-only. The combi option near this size is the TRX110C, which heats at 11.2 to 106 MBH and adds DHW.

What venting does the TRX120 use?

2" runs to 100 ft or 3" runs to 150 ft per side, per the NTI product page.

Questions about the NTI Trinity TRX120?

Describe what the boiler is doing and get a straight answer about the next step.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 7, 2026. Last updated September 7, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate