Rinnai IP090099C
The Rinnai IP090099C is the I-Series+ combi with the closest CH/DHW pair: 15 to 90 MBH heating input and a 99 MBH DHW input (5.3 GPM maximum flow), rated up to 96% AFUE in Rinnai's Canadian marketing.
Key figures
- Max input
- 90 MBH
- Max CSA output
- —
- AFUE
- 96 %
- Min input
- 15 MBH
Input is gas energy consumed; output is heat delivered. Never size from input alone.
Rinnai IP090099C in practice
The IP090099C is unusual in the I-Series+ combi range because its two ratings are nearly equal: up to 90,000 BTU/h for central heating and 99,000 BTU/h for domestic hot water, with 5.3 GPM maximum DHW flow per the I&O manual. It is the only small combi whose DHW side does not far exceed the heating side, which keeps its gas supply and venting demand modest.
Like the rest of the small chassis, it weighs 73 lb, holds 0.75 gal of CH water and mounts on an 18.5 x 11.5 in footprint. Its 2" twin-pipe vent allowance is the longest in the small-combi group at 100 equivalent feet below 2,000 ft elevation (75 ft above), per the I&O manual Table 20.
All small-combi supply connections apply — 3/4" NPT gas and DHW, 1" NPT heating — and CH water pressure is 13-45 PSI with a 30 PSI relief valve included. Efficiency is the family marketing claim of up to 96% AFUE; the manual prints no per-model AFUE figure.
Best suited to
- Homes whose heat loss and hot-water needs both sit near 90-100 MBH
- Owners who want a combi without the gas-demand jump of a 199 MBH DHW rating
- Longer 2" vent runs up to 100 equivalent ft below 2,000 ft elevation
Applicability and support
- Model number
- IP090099C
- Canadian availability
- available
- Production status
- current
- ROMA supplies
- Confirmed at consultation
- ROMA services
- Confirmed at consultation
- Warranty
- Series terms
Where ROMA provides on-site service
On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.
Specifications
Published specifications
Values as published by Rinnai. Units are shown with every value; notes flag conflicting sources or missing figures.
| Specification | Value | Note |
|---|---|---|
| Input | ||
| Heating input, minimum | 15 MBH | Space-heating input; 15,000 BTU/h minimum input per spec Table 2. |
| Heating input, maximum | 90 MBH | Space-heating (CH) maximum input per spec Table 2. |
| Efficiency | ||
| Efficiency (AFUE) | 96 % | Up to 96% AFUE per Rinnai Canada marketing copy and the Canadian brochure; no per-model AFUE figure is printed in the I&O manual spec tables. |
| Domestic hot water | ||
| DHW input, maximum | 99 MBH | 99,000 BTU/h maximum DHW input per spec Table 2. |
| Maximum DHW flow rate | 5.3 GPM | 5.3 GPM (20 L/min) per spec Table 2; 2.5 GPM at a 70°F rise. The product page lists 5.3 GPM. |
| Domestic hot water | On demand inside the combi | DHW input and flow figures above; DHW temperature setting range 98°F-140°F (37°C-60°C) per spec Table 2. |
| Venting and air | ||
| Venting | 2" nominal PVC/polypropylene or 3" x 5" concentric | Vent connection per the I&O manual; direct-vent (concentric or twin-pipe) and room-air options are covered in the manual's venting section. |
| Max. equivalent vent length, 2" | 100 ft | Twin-pipe 2" PVC / 2" PP maximum equivalent length per the I&O manual (Table 20); above 2,000 ft (610 m) elevation the maximum drops to 75 ft. |
| Physical and connections | ||
| Weight | 73 lb | 73.0 lb (33 kg) per the I&O manual spec Table 2; the product page lists 73 lb (33.11 kg). |
| Water content (CH) | 0.75 gal | Central-heating water content per spec Table 2. |
| Gas connection | 3/4" NPT | Per spec Table 3. |
| Heating water connections | 1" NPT | CH supply and return per spec Table 3. |
| DHW connections | 3/4" NPT | DHW cold inlet and hot outlet per spec Table 3. |
| Width | 18.5 in (470 mm) | Per the I&O manual dimension figure and the product page. |
| Depth | 11.5 in (291 mm) | Per the I&O manual dimension figure; the product page lists 292.1 mm. |
| Operating limits and other | ||
| Fuel | Natural gas or propane | Gas supply pressure per spec Table 2: NG 3.5-10.5 in. W.C. (0.87-2.61 kPa); propane 8.0-13.5 in. W.C. (1.99-3.36 kPa). |
| CH water pressure | 13 – 45 psi | Minimum 13 PSI (90 kPa), maximum 45 PSI (310 kPa); recommended 17-26 PSI; 30 PSI pressure relief valve included with the system (spec Table 2). |
Manuals
Alerts documented for this model
Frequently asked questions
Why does the IP090099C deliver less hot water than the IP060160C?
Its DHW rating is smaller by design: 99,000 BTU/h of DHW input and 5.3 GPM maximum flow against the IP060160C's 160,000 BTU/h and 7.9 GPM. Both figures come from the I&O manual spec table.
Does the IP090099C vent in 2" pipe?
Yes — and further than the other small combis: the I&O manual allows 100 equivalent feet in 2" twin-pipe below 2,000 ft elevation, dropping to 75 ft above that elevation.
How do I read the 090099 part of the model name?
As CH input over DHW input in thousands of BTU/h: 90 MBH of central-heating input and 99 MBH of DHW input.
Questions about the Rinnai IP090099C?
Describe what the boiler is doing and get a straight answer about the next step.
On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.
Sources and verification
- Rinnai Canada — IP090099C product page · accessed September 7, 2026
- Rinnai Canada — condensing boilers · accessed September 7, 2026
Facts checked September 7, 2026. Last updated September 7, 2026. Technical reviewer: not yet assigned.