Lochinvar Knight Outlet Temp Diff — Temperature Difference Between the Two Outlet Sensors is Too High
Outlet Temp Diff
Temperature difference between the two outlet sensors is too high. The temperature difference between the two outlet sensors is too high, so check the sensor wiring, measure the sensor resistance against Table 3-2C, replace the sensor, restore control parameter defaults, or replace the control module. The table classifies it as Lockout (manual reset).
Applies to
This sensor fault code is displayed by the SMART SYSTEM control on Knight fire-tube boilers (KHB floor 055–285 and WHB wall 055–399), as documented in Knight Service Manual, doc 100305279 Rev E — Table 3-4 fault codes (KHB floor; the WHB service manual Rev G prints the same table) (100305279 Rev E). Codes can differ between controller generations, so always check the manual that matches your unit.
- Lochinvar Knight Floor Mount (KHB)
- Lochinvar Knight Wall Mount (WHB)
- Lochinvar Knight KHB055
- Lochinvar Knight KHB085
- Lochinvar Knight KHB110
- Lochinvar Knight KHB155
- Lochinvar Knight KHB199
- Lochinvar Knight KHB285
- Lochinvar Knight WHB055
- Lochinvar Knight WHB085
- Lochinvar Knight WHB110
- Lochinvar Knight WHB155
- Lochinvar Knight WHB199
- Lochinvar Knight WHB285
- Lochinvar Knight WHB399
Controller: SMART SYSTEM control. Source manual: 100305279 Rev E (2024-04).
Why a code is not a diagnosis
A sensor code usually means the sensor, its wiring or its mounting is faulty; the physical condition the sensor measures (temperature, pressure, flow) may be perfectly normal.
Safe things to observe
- Note the code; there is no homeowner-accessible check for sensor circuits.
- If the appliance still runs, watch whether the code returns and report it when you call.
Do not
- Do not open the appliance to test or replace sensors yourself.
How professional service helps
- A technician measures the sensor and harness against the manual's values and replaces the faulty component.
- Combustion and safety devices are verified with an analyser and the manufacturer's procedure after any repair.
Where ROMA provides on-site service
On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.
Parts and service
Parts commonly involved
These parts appear in the documented text for this alert. A code reports a condition, not a failed part — a technician confirms the cause by testing before anything is replaced.
Boiler sensors (thermistors)
Boiler sensors are small temperature probes, usually thermistors, that tell the control how hot the water and flue gases are so it can fire safely…
What a technician checks →Control board / PCB
The control board — also called the PCB, or printed circuit board — is the boiler's main computer.
What a technician checks →
Service for this alert
- Gas Boiler Repair
Licensed gas technicians from ROMA Heating & Cooling diagnose and repair residential and light-commercial gas boilers across…
- Emergency Boiler Repair
Priority gas boiler repair for homes and buildings in Greater Vancouver with no heat, no hot water, a locked-out boiler or a leak.
Every boiler part explained — what it does, how it fails and what a technician checks.
Documented for Lochinvar Knight Floor Mount (KHB) and Lochinvar Knight Wall Mount (WHB).
Frequently asked questions
Can I clear this code myself?
Clearing a code without fixing its cause usually just brings it back. Note the code, check the safe items on this page, then call a licensed technician. If your appliance manual describes a user reset for this exact code and it stays away, no call may be needed.
Boiler locked out? Call with the alert text ready.
The brand, model and this alert are passed along when you request service online, so the technician arrives prepared.
On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.
Sources and verification
- Knight Service Manual, doc 100305279 Rev E — Table 3-4 fault codes (KHB floor; the WHB service manual Rev G prints the same table) · 100305279 Rev E · accessed September 7, 2026
Facts checked September 7, 2026. Last updated September 7, 2026. Technical reviewer: not yet assigned.