IBC Technologies · Superflow SFT-1 Tankless
IBC SFT 199-1 Superflow
The IBC SFT 199-1 Superflow is a wall-hung condensing tankless water heater rated 0.90 UEF, firing from 28.5 to 199 MBH to deliver continuous hot water, documented here because IBC pairs it with its heating-only boilers for domestic hot water.
Key figures
- Max input
- 199 MBH
- Max CSA output
- —
- AFUE
- —
- Min input
- 28.5 MBH
Input is gas energy consumed; output is heat delivered. Never size from input alone.
IBC SFT 199-1 Superflow in practice
The SFT 199-1 is a DHW-only appliance: it does not heat rooms, and it fires only when a hot-water tap opens. It is documented on Boilers.ca because it is the tankless partner IBC markets alongside its SL and VX heating-only boilers, and because its fault codes (F-series on a numeric touch panel) are part of the same Superflow manual family as the SFC combi.
Output is continuous up to the burner input, so the rating that matters is flow at a temperature rise: roughly 10 GPM at a 35°F rise, about 5.4 GPM at a 67°F rise, and 5.2 GPM at 70°F, per IBC's Canadian model page. In winter, Vancouver's incoming water is cold, so a rise of 60-70°F is the realistic planning figure for a shower.
Installation is indoor wall-hung and direct-vent on 2" or 3" Schedule 40 PVC, CPVC or PPs (ULC S636 rules apply to plastic venting in Canada). Like every condensing gas appliance it produces acidic condensate that must drain away, and in a hard-water area the heat exchanger design is IBC's stated reason for choosing the SFT-1.
Best suited to
- Boiler homes that want tankless hot water instead of an indirect tank
- Households with steady but not simultaneous high-flow hot-water use
- Replacement of an older tank or tankless unit where 2" or 3" PVC venting fits
Applicability and support
- Model number
- SFT 199-1
- Canadian availability
- available
- Production status
- current
- ROMA supplies
- Confirmed at consultation
- ROMA services
- Confirmed at consultation
- Warranty
- Not verified
Where ROMA provides on-site service
On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.
Specifications
Published specifications
Values as published by IBC Technologies. Units are shown with every value; notes flag conflicting sources or missing figures.
| Specification | Value | Note |
|---|---|---|
| Input | ||
| Input, minimum | 28.5 MBH | 28,500 BTU/h |
| Input, maximum | 199 MBH | 199,000 BTU/h |
| Efficiency | ||
| Efficiency (UEF) | 0.90 | Rated UEF for natural gas and propane per IBC's Canadian model page. |
| Domestic hot water | ||
| DHW flow at 35°F rise | 10.1 GPM | 38 LPM |
| DHW flow at 45°F rise | 7.9 GPM | 30 LPM |
| DHW flow at 67°F rise | 5.4 GPM | 20 LPM |
| DHW flow at 70°F rise | 5.2 GPM | IBC's feature copy says up to 5.2 GPM at a 70°F rise; the temperature-rise table on the same page agrees. |
| Flow to activate DHW | 0.5 GPM | |
| Domestic hot water | Condensing tankless water heater; fires only when a hot-water tap opens | |
| Venting and air | ||
| Flue material | 2" or 3" Schedule 40 PVC, CPVC or PPs | Canada: venting must meet ULC S636 where applicable. |
| Max. equivalent vent length, 2" | 65 ft | Each side. |
| Max. equivalent vent length, 3" | 120 ft | Each side. |
| Physical and connections | ||
| Weight (empty) | 68 lb | 31 kg |
| Width | 17.7 in | 450 mm |
| Height | 29.8 in | 757 mm |
| Depth | 10.9 in | 277 mm |
| DHW connections | 3/4" NPT | |
| Gas connection | 3/4" NPT | |
| Condensate connection | 3/4" hose | |
| Electrical | ||
| Power supply | 120 V / 60 Hz | 100 W at full fire per IBC model page. |
| Operating limits and other | ||
| Fuel | Natural gas or propane | Conversion kit included per IBC model page. |
| Gas supply pressure | 4 – 14 in. w.c. | |
| Water supply pressure | 40 – 150 psig | |
Manuals
Alerts documented for this model
Frequently asked questions
Is the SFT 199-1 a boiler?
No. It is a condensing tankless water heater that produces domestic hot water only. IBC's combi is the SFC-1; the heating-only SL and VX boilers pair with an indirect tank instead.
How much hot water does the SFT 199-1 deliver?
Continuously, at flow rates that depend on the temperature rise: about 10.1 GPM at a 35°F rise, 5.4 GPM at a 67°F rise and 5.2 GPM at 70°F, per IBC's Canadian model page.
Can the SFT 199-1 run on propane?
Yes. IBC lists natural gas or propane and states a fuel conversion kit is included.
Questions about the IBC SFT 199-1 Superflow?
Describe what the boiler is doing and get a straight answer about the next step.
On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.
Compare and explore
Sources and verification
- IBC SFT 199-1 — model page (Canada) · accessed September 7, 2026
- IBC SUPERFLOW SFT-1 — series page (Canada) · accessed September 7, 2026
- IBC SFT-1 Installation & Operating Instructions · 84160406 · accessed September 7, 2026
Facts checked September 7, 2026. Last updated September 7, 2026. Technical reviewer: not yet assigned.