Skip to content
Boilers.caby ROMA Heating & Cooling

Viessmann · Vitogas 050 (ECD / ECV / RS)

Viessmann Vitogas 050 ECD-65

The Vitogas 050 ECD-65 is the smallest ECD atmospheric cast-iron boiler: 65 MBH input (19 kW), 54 MBH output and 83.7% AFUE in a three-section chassis.

DiscontinuedHistorically in Canada

Key figures

Max input
—
Max CSA output
—
AFUE
83.7 %
Min input
—
Natural gasPropaneHeating-onlyresidential

Input is gas energy consumed; output is heat delivered. Never size from input alone.

Viessmann Vitogas 050 ECD-65 in practice

The ECD-65 is an atmospheric cast-iron sectional boiler rated 65 MBH (19 kW) input and 54 MBH (16 kW) output at 83.7% AFUE — the highest printed figure in the ECD range. It uses three cast-iron sections with two burners and holds 2.6 USG of boiler water at 50 psig maximum operating pressure.

At 233 lb (106 kg) it measures 340 x 502 mm (13½ x 19¾ in) with a 1035 mm (40¾ in) height, and it vents through a 5 in. collar with the draft hood and vent damper described in the ECD technical data manual.

Best suited to

  • Existing ECD-65 installations needing printed ratings
  • Small residential loads near 65 MBH input
  • Documentation for the entry ECD size

Applicability and support

Model number
ECD-65
Canadian availability
historical
Production status
discontinued
ROMA supplies
Confirmed at consultation
ROMA services
Confirmed at consultation
Warranty
Not verified

Where ROMA provides on-site service

On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.

See all service areas

Specifications

Published specifications

Values as published by Viessmann. Units are shown with every value; notes flag conflicting sources or missing figures.

Viessmann Vitogas 050 ECD-65 specifications
SpecificationValueNote
Input
CSA input (natural gas)65 MBH19 kW, per the technical data manual
Output
CSA output / DOE output54 MBH16 kW
Efficiency
Efficiency (AFUE)83.7 %With intermittent pilot electronic ignition system and vent damper.
Venting and air
Vent pipe collar5 inChimney-vented with draft hood; each ECD ships with a vent damper.
Physical and connections
Weight (with insulation, burners and packaging)233 lb106 kg
Overall width340 mmPrinted as 13½ in
Overall depth502 mm19¾ in
Overall height1,035 mmPrinted as 40¾ in
Operating limits and other
FuelNatural gas or propane3.5 in. w.c. manifold pressure NG; 10 in. w.c. propane.
Cast iron sections32 burners.
Boiler water content2.6 USGPer the technical data manual.
Maximum operating pressure50 psig345 kPa.
Boiler supply / return1¼ in. male threadGas supply ½ in. male thread.

Frequently asked questions

What is the ECD-65 rated at?

65 MBH (19 kW) CSA input, 54 MBH (16 kW) CSA/DOE output and 83.7% AFUE, with three cast-iron sections and two burners.

Is the ECD-65 still sold?

No. The Vitogas 050 line is discontinued and documented under Viessmann Canada's historic manuals.

What vent size does the ECD-65 use?

A 5 in. vent pipe collar; ECD boilers are chimney-vented with a draft hood and ship with a vent damper for minimum-AFUE compliance.

Questions about the Viessmann Vitogas 050 ECD-65?

Describe what the boiler is doing and get a straight answer about the next step.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate