Skip to content
Boilers.caby ROMA Heating & Cooling

IBC Technologies · Series

IBC Technologies SL Series G3

The SL Series G3 is IBC's wall-mounted residential condensing boiler line, available in four inputs from 85 to 199 MBH, running on natural gas or propane, with a V-10 touchscreen controller and a stainless-steel heat exchanger.

Current seriesSold in CanadaNatural gasPropaneresidential

Series facts

Type
condensing
Efficiency
95% AFUE
Fuel
Natural gas or propane; IBC model pages state a conversion kit is included.
Venting
3" Schedule 40 or 3" polypropylene (PPs, 80 mm) flue; direct-vent or indoor air supply.
Models documented
4

95% AFUE for the 115, 160 and 199 models; IBC lists 96% for the SL 10-85 G3 only.

About the SL Series G3

The SL G3 is a heating-only condensing boiler. It does not produce domestic hot water on its own; IBC documents connecting an indirect water tank directly to the boiler without a primary loop, which keeps the piping simpler than many combi-plus-tank arrangements.

Four sizes cover most detached homes and townhouses in the Lower Mainland: SL 10-85 G3, SL 14-115 G3, SL 20-160 G3 and SL 30-199 G3. The first number is the minimum input in MBH and the second is the maximum, so an SL 30-199 G3 modulates between roughly 32 and 199 MBH input. Choosing between them depends on a heat-loss calculation for the building, not on floor area alone.

IBC's own documents disagree on turndown: the Canadian brochure headline says up to 10:1 while the individual model pages say up to 8:1. Boilers.ca lists the model-page figure. Efficiency is 95% AFUE for the 115, 160 and 199 models; the 96% figure in the brochure applies to the smallest SL 10-85 G3.

Highlights

  • Natural gas or propane (conversion kit included per IBC model pages)
  • 95% AFUE on the 115 / 160 / 199 models
  • 3" Schedule 40 or 3" PPs venting, direct-vent or indoor air
  • V-10 touchscreen controller with plain-language alerts
  • Indirect tank connection without a primary loop
  • Five-year limited parts and limited lifetime heat-exchanger warranty (conditions apply)

IBC publishes a five-year limited parts warranty and a limited lifetime residential heat-exchanger warranty for SL series boilers manufactured after 1 October 2015, conditional on installation by a certified contractor through an authorized IBC distributor.

Models

SL Series G3 models

One canonical page per model with input, output and efficiency kept separate.

IBC Technologies

IBC SL 10-85 G3

CurrentSold in Canada
Input
10.6–85 MBH
Output (max)
79 MBH
AFUE
96 %

The IBC SL 10-85 G3 is the smallest SL Series G3 boiler: 10.6 to 85 MBH input with a 96% AFUE rating, wall-hung and available for natural gas or propane. It is the size to consider for compact homes and low heat-loss buildings.

Natural gasPropaneHeating-only

IBC Technologies

IBC SL 14-115 G3

CurrentSold in Canada
Input
14–115 MBH
Output (max)
109 MBH
AFUE
95 %

The IBC SL 14-115 G3 is a wall-hung residential condensing boiler with a 14 to 115 MBH input range and 95% AFUE, running on natural gas or propane. It is the size most often matched to a typical Lower Mainland detached home with radiators or in-floor heat.

Natural gasPropaneHeating-only

IBC Technologies

IBC SL 20-160 G3

CurrentSold in Canada
Input
20–160 MBH
Output (max)
147 MBH
AFUE
95 %

The IBC SL 20-160 G3 is the 160 MBH member of the SL Series G3: a wall-hung, 95% AFUE condensing boiler for natural gas or propane, bridging the 115 and 199 models for homes with higher heat loss or hot-water loads.

Natural gasPropaneHeating-only

IBC Technologies

IBC SL 30-199 G3

CurrentSold in Canada
Input
32–199 MBH
Output (max)
181.3 MBH
AFUE
95 %

The IBC SL 30-199 G3 is the largest residential SL G3 boiler: 32 to 199 MBH input, 95% AFUE, natural gas or propane. It suits large homes, homes with high hot-water demand through an indirect tank, and some small multi-suite buildings.

Natural gasPropaneHeating-only

Error codes and alerts

SL Series G3 alerts

Manuals

Official documents

Where ROMA provides on-site service

On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.

See all service areas

Frequently asked questions

Is the SL Series G3 a combi boiler?

No. SL G3 boilers are heating-only. Domestic hot water is provided by connecting an indirect tank, which IBC documents as a direct connection to the boiler.

Which SL G3 size do I need?

Sizing follows a room-by-room heat-loss calculation of your home, the emitters you have (radiators, in-floor, fan coils) and any indirect tank demand. Square footage alone is not enough. The IBC line runs from 85 to 199 MBH input.

What venting does an SL G3 use?

IBC specifies 3" Schedule 40 or 3" polypropylene (PPs) flue, with either direct-vent (sealed) or indoor air supply. Maximum equivalent vent length differs by model, so check the model page and the installation manual.

Talk to a boiler technician

Describe what the boiler is doing and get a straight answer about the next step.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 7, 2026. Last updated September 7, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate